Connect with us

Beauty & Fashion Guide

How to Clean Clarks Desert Boots – Quick Step-By-Step Guide



Clarks Desert boots are known to be comfortable and also stylish. However, most people don’t know how to clean them appropriately. 

For instance, some people tend to use the wrong cleaning products. Others are hesitant about cleaning the boots because they are not sure what products to use. 

But what if we told you that cleaning your Clarks boots is not as hard as you think? And in this article, we’re going to explore tips on how to clean Clarks Desert Boots. 


Types of Clarks Desert Boots

As it turns out, Clark boots are available in two types. Simply put, they are categorized based on the kind of leather they are made from. This means that the cleaning method may differ depending on the kind of Desert boot you own. These include: 


This is considered to be the original colorway for the Desert boot. The boot is packed with fats and oils to ensure it can last for a while before requiring restoration. However, this type of leather is more tedious to clean compared to suede. 


This type of leather is considered to be less superior to beeswax. However, it is more durable than many people give it credit for. More so, the process of cleaning suede boots is straightforward and not very time-consuming. 


How to Clean Clarks Desert Boots Beeswax

Your beeswax Desert boots may not need much care. However, with time, the shoes can gather dirt. Therefore, cleaning them at least every 6 months is a good idea to keep them looking as good as new. 

Of course, you will need a good set of care equipment to clean them up, including:

That said, below are the steps to follow when you want to clean your beeswax Desert boots. 


Step 1: Brush off dirt buildup

Before you start cleaning your Beeswax boots, you must get as much dirt off as possible. This is because a small grain of sand could easily put a scratch into your leather boots. 

Generally, you can use a soft bristle brush to remove the dirt on the surface of the shoe. Also, you can choose to use a dry rag or cloth to wipe the boots gently. However, if there are old scuff marks, you can brush harder. 


Step 2: Apply saddle soap

After brushing off the dust and dirt of your shoes, get your tin of saddle soap. Then, fill the top of the tin with hot water and apply a dime-sized amount of saddle soap on a rag. 

Using the rag, rub the saddle soap into the Desert boot until you have covered the entire boot. However, you must clean one shoe at a time. This method will help remove stubborn and tough stains. 


Step 3: Get rid of saddle soap

Next, remove the saddle soap you applied on the boot using a new dry rag. And for the best results, make sure to wipe the soap repeatedly, especially around the welt areas. 

When you are done, you might notice a small amount of water soaked into the boots. If this is the case, then you should let the shoes dry out completely. Just make sure not to expose the leather to a heat source as it may crack. 


Step 4: Apply the leather balm

By now, your favorite Clarks Desert shoes should already be looking fresh. However, having worn the boots for months, it is expected that the leather has lost its natural oils. 

Therefore, to restore the glossiness of the shoes, you will need to apply leather balm to the Desert boots. Simply dab some balm on the corner of your dry rag and rub it into the entire boot in small circles. This will help restore your leather boots to their former glory.  


Step 5: Buff and let the boots dry

Once you’re done applying the leather balm on the boots, you need to buff them using a horsehair buffing brush. This is designed to help disperse the balm and any residual saddle soap. As such, your shoes will condition evenly. 

Lastly, allow your Desert boots to dry for at least 20 minutes before you can wear them. 


How to Clean Suede Clarks Desert Boots 

Now that you know how to clean Beeswax Clarks Desert boots, let’s find out how to clean their suede counterparts. 

Step 1: Brush off excess dirt

Start by brushing off dirt and dust off the shoe surface using a suede brush. Ideally, you should brush the boots in one direction to ensure you don’t flatten the nap. 

Additionally, you can use a dry and clean rag to remove any residual dirt. The advantage of using a sued brush is that it is cheap and cleans quickly. However, this method is not effective at getting rid of stubborn stains.

Step 2: Use a suede eraser

If you notice that the shoe still has a few dark marks, then you will need to use a suede eraser. Basically, a suede eraser is a small piece of crepe rubber. It is usually the same material as that on the sole of your boot. 

So, using the suede eraser, rub the stains in small circles until the scuff and marks come off completely. Next, brush the boots with a suede brush to restore the nap. Unfortunately, this method will not remove water stains.  

Step 3: Use a cleaning solution

If there are still marks or stains on the boots even after using an eraser, you can use a suede cleaning solution. Also, you can choose to use distilled white vinegar to dissolve the stains. 

Simply apply a small amount of the suede cleaning solution or vinegar to the stained area. You see, applying too much of the solution could worsen the stains. Next, let the solution sit for 10-20 minutes. 

Step 4: Repeat steps 3 and 2

After letting the cleaning solution sit for at least 10 minutes, use a suede eraser. This will help remove any remaining marks or scuffs. 

Next, brush the shoes with a suede brush to restore the nap. And lastly, allow the Desert boots to air dry in the shade.

Step 5: Use a suede protector

This step is optional. However, if you want to stay a little longer before cleaning your Desert boots, you should apply a suede protector. 

The suede protector does a great job at waterproofing the suede on your Clarks boots. More so, it provides a layer of stain and weather resistance to ensure the boots stay fresh for longer. 


Extra Tips on How to Clean Your Clarks Desert Boots – Beeswax or Suede

That said, here are some additional tips on how to care for your Clarks Desert boots. Check them out. 

  • Never apply regular soap or detergent on your leather boots. It could damage or discolor them. 
  • Waterproofing your Clark Desert boots will make them last longer. 
  • Always clean the shoes whenever they get dirty. It is not advisable to leave them dirty for too long.
  • Make sure to brush the boots gently when getting rid of the dirt.
  • Never allow your shoes to dry next to a heating vent as it may ruin the suede or beeswax fabric. 
  • It is easier to clean the boots after you have removed the laces.
  • You should never apply any solution to your leather boot before testing it on a conspicuous area. 


Bottom Line

Your Desert boots are an investment. Therefore, proper care is required to ensure you get a long life out of your boots. So, we hope you find the above tips and steps on how to clean Clarks Desert boots useful.

Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *