Walking on slippery shoes is endangering your life as it can cause an accident. Tumbling and falling on site is prevalent hence the need for slip-resistant shoe soles. Shoes with worn-out soles can make you slip or skid and fall when you are not attentive and watching your steps, which is mainly caused by modern-day chatting on phone or making phone calls on mobile cellular. In this guide, we’ll look at several ways how to make shoes non-slip for work. So let’s find out.
Step-By-Step Guide on How To Make Shoes Non Slip For Work
Here are a few important steps to take when making your shoes nonslip. So let’s get started.
When you have shoes with smooth outer soles then you will automatically be prone to slipping as your shoe sole has no grip on the slippery surface. The best workable tip here is to make the soles rough.
How do you make it rough? You can start by scuffling your feet on a rough surface full of gravel, pebble, rocky concrete areas.
The main idea here is to develop nooks and abrasions at the shoe bottom to make it slip-resistant.
This process assures you of very good traction and grip which helps in making it a non-slip sole.
Application of sandpaper
Using sandpaper to cause a rough surface on the shoe bottom can also go a long way to scuff the shoe sole.
Walking on a rough surface, hard concrete, or any rough terrain to scuff off your shoe sole is both dangerous and irritating.
All you need to do with ease is to apply the technique of using an appropriate type of sandpaper that works best in the scuffing process.
By using this type of sandpaper you can scrub the bottom soles only for a few moments and there you are now able to confidently walk on any slippery surface.
The good news is that you can roughen the shoe sole at the comfort of your home or house. All you need is a few minutes of your time to create the abrasion and the desired grip.
You will probably need the 50 grit sandpaper which when used well will give a textured feeling on the sole.
Puff Paint Application
Children love artwork all the time. The paint they use comes in handy when it comes to making your shoe sole non-slip. Yes, it is doable with the puff paint spray! You can by all means create a rough sole using this spray. You may be asking how this can be done. Well, this is how it is done.
Apply the puff paint spray thinly on the surface of your smooth footwear bottom. Your target area is the one that is in contact with the surface. After the application, set your shoe in a place where it can dry. To assess the surface for a firm grip, there should be a textured feeling. Remember to use the same color as your shoe. Different colors will change the aesthetic value of your footwear.
The traction spray functions almost the same way as the grip pads. When applied to the sole of your shoe, the sole is transformed into a non-slip sole. But how do you apply it?
The spray is applied generously on the bottom surface of your footwear. Always protect your working surface to avoid spillage.
Leave it to dry. You will notice that the traction spray works perfectly well to give you the grip and it is good for those who are on a budget.
Attaching Non-Slip Soles
Non-Slip soles are attached to the outer part of the footwear. It seems to be one of the best alternatives to slip-resistance tips so far.
These soles are attached to the slippery shoe soles. They sustain the grip and hence protect the user from any accidental slips and skids. Additionally, they support the process of quick wear and tear of the footwear.
The non-slip soles are attached to the bottom of the shoe using an adhesive. This can take the user a long way.
It is a long-lasting solution to slippery soles as the created abrasion and grip lasts for years on end.
Using Rubber Glue and Salt
The main idea here is to create a rough texture for your shoe sole to avoid slipping and accidentally breaking a limb or so.
This procedure works perfectly well for improving the much-needed traction on the shoe sole. All you need is salt grain and rubber glue.
Mix the salt grains with glue. The mixture must be proportional to give the desired grip.
You can use a brush with appropriate bristles to paint the mixture on the sole as well as the heels of your shoe. Be patient with the mixture to thoroughly dry on the shoe before wearing them.
Score the Soles
You may want to create abrasion on your new pair of shoes in a different way from the other well-known methods. Well, there is this process of scoring the soles using a variety of tools.
We have the plastic and metal files which come in handy for this work. Preferably use the metallic file which creates the desired coarseness on the shoe sole.
Scoring can take some minutes to complete as it calls for high concentration as you would not like to spoil your shoe. You can also use a sharp razor blade or a knife.
- Turn the shoe upside down.
- Gently create diagonal cuts along the shoe sole and repeat the action in the opposite direction.
- As you create a pattern with these cuts you are making grooves that can grip the surface.
- Caution must be taken not to cut deep into the sole.
Use of Shoe Grip Pads
These are adhesive pads cut to fit a variety of soles and are fixed on the base of the shoe to give the desired grip. Some of these pads can be trimmed to fit any size of the shoe.
Some are specifically made according to the shoe type. The pads purchased should be fitting for a long-lasting grip.
The grip pads are made in a way that you simply peel off the covering and carefully place it on the targeted surface of the sole.
After firmly pressing the grip pad on the sole, leave it for a couple of hours before wearing your shoes. Remember that for the best result for non-slip shoe soles use the correct shoe grip pads.
These ankle straps are both convenient and easy to use as compared to the other non-slip shoe sole tips. The straps allow you to choose the style you want. They don’t require a lot of your time to fix.
You only attach it to the shoes and Voila! You walk away comfortably as go about your daily life. The ankle straps also assist you to walk on oily or greasy surfaces.
We’ve just looked at some of the essential steps to take when making shoes non slip for work. As you can see, you don’t need to be a shoe care professional to know how to make shoes non slip for work. You can apply any of the mentioned tips or simply engage the services of a cobbler.
The best you can do is to be attentive and be on the watch out as you step out to avoid unnecessary accidents and injuries.
Your shoe is in perfect condition as a non-slip sole the moment you follow one of these proven tips.
I’m Jene Chertoff. I will be helping you with all your foot-related issues and the fashion concerns, trends, what to wear, and what not to wear for a better style.
Everything that I will suggest will be accurate and legit to follow. Being a follower of the fashion industry for the last 3 years, I know exactly what’s on-trend and what to suggest to you. Keep your hopes high and keep surfing here. Read More..